SavarMobile

MOST WELCOME TO OUR COMMUNITY MY BROTHER / SISTERS

" ENJOY STAY HERE "

= WELCOME TO SAVAR MOBILE FORUM =

= PLEASE REGISTER FOR WHICH CAN NOT LOG-IN =
= WE ARE GLAD THAT IF YOU WANT TO SHARE EXPERIENCES WITH SCIENCE AND WE HERE =


= WARM GREETINGS =
SavarMobile


    ** What is Difference Between Recovery Mode and DFU Mode **

    Share
    avatar
    mehedi
    ® FORUM OWNER ®


    Posts : 593
    Join date : 2010-10-08
    Age : 25
    Location : http://savar.goodforum.net/forum.htm

    ** What is Difference Between Recovery Mode and DFU Mode **

    Post by mehedi on Sat 19 Mar 2011, 11:54 pm

    The Main difference between the Recovery mode and DFU mode is iBoot.
    Recovery mode uses iBoot during restoring or upgrading your iPhone
    while DFU mode bypasses the iBoot so you can downgrade the current
    firmware because there is no iBoot agent during the DFU mode. About
    iBoot, iBoot is the bootloader on iPhone OS devices. iBoot acts on
    restore while iPhone is in Recovery Mode, iBoot makes sure that you are
    flashing a firmware version greater than or equal to a current one. If
    you are not, iBoot will not allow the restore to proceed. Because of
    this, firmware downgrading must be done in DFU mode.This means if you
    need to restore your iPhone to current version simply put the iPhone in
    recovery mode and iTunes takes care of the rest but if you need to
    downgrade your current firmware to lower one you need to put your
    iPhone in DFU mode. For example you can’t downgrade Firmware 3.0 to
    Firmware 2.2.1 without entering in to DFU Mode.

    [You must be registered and logged in to see this image.][You must be registered and logged in to see this link.] '/wp-content/uploads/2009/06/dfurestore-thumb.jpg']);window.open(this.src)" src="http://www.ihackintosh.com/wp-content/uploads/2009/06/dfurestore-thumb.jpg" alt="" border="0">


    Recovery
    Mode : Recovery Mode is a state of iBoot that is used during standard
    upgrades and restores. As iBoot is active, it does not allow you to
    downgrade your device’s software. Also, unless it is ‘pwned,’ it will
    not allow custom firmware to be flashed.

    DFU Mode : DFU Mode is
    a special mode where the device can still interface with iTunes, yet it
    does not load the iBoot. The screen will appear totally black in DFU
    mode, so you can’t guess whether the device is in DFU or powered down
    from simply looking at the screen. Because iBoot and the OS are not
    loaded this exploit makes us able to downgrade your iPhone firmware or
    upgrade with a custom firmware created by Pwnage tool.

    How to put your iPhone in recovery mode :

    1. Turn the device completely off and disconnect it from cable/dock.
    2. Hold down the home button.
    3. While holding down the home button connect to a computer with a cable (easiest) or dock.
    4. Keep holding down the home button until you see a connect-to-itunes screen You are now in recovery mode.

    To escape Recovery Mode and power the phone off simply hold down power and home buttons for ten seconds.

    How to put your iPhone in DFU mode :

    1. Connect your iPhone to your computer.
    2. Turn iPhone off.
    3. Hold power and home together for 10 seconds (exactly).
    4. Release power but keep holding home until the computers beeps (observed on a PC) as a USB device is recognized.
    5. A few seconds later iTunes should detect your iPhone.
    6. If the Restore Logo is present on the screen, you are in Recovery Mode, not DFU.

    To escape DFU Mode and power the phone off simply hold down power and home buttons for ten seconds.


    ======================================================================================
    [You must be registered and logged in to see this image.] [You must be registered and logged in to see this image.]
    ......::::::MEHEDI HASSAN::::::......

      Current date/time is Mon 19 Nov 2018, 7:02 pm